Thank you for choosing C2Z Pressed Inc.! Follow these simple instructions to help your UV DTF transfers look beautiful and last.
✨ Step-by-Step Application Instructions
Step 1: Clean Your Surface 🧼
Clean your cup, tumbler, glass, or other compatible hard surface with rubbing alcohol to remove oils, dirt, and residue. Allow the surface to dry completely.
Step 2: Prepare Your Transfer ✂️
Carefully trim around your design if needed. Rub firmly over the transfer with a squeegee or application card to help the design adhere to the clear transfer film.
Step 3: Peel the Backing 🎀
Slowly peel away the paper backing, making sure the entire design remains attached to the clear transfer film.
Step 4: Position Your Design 💕
Carefully align your transfer on the desired surface before applying pressure.
⚠️ Important: UV DTF transfers are designed for permanent application. Once the adhesive touches the surface, repositioning may damage the design.
Step 5: Apply & Press 💚
Starting from one edge, slowly press the transfer onto the surface. Use your fingers or a squeegee to apply firm, even pressure across the entire design, working outward to reduce air bubbles.
Step 6: Remove the Transfer Film ✨
Slowly peel away the clear transfer film at a low angle. If part of the design begins lifting, lay the film back down, apply more pressure, and try again.
Step 7: Enjoy Your Creation! 🧡
Your customized item is ready to admire! Follow our care instructions to help protect your design.
💡 Helpful Application Tips
- Apply to clean, smooth, dry, nonporous surfaces.
- Avoid textured, dusty, or oily surfaces.
- Do not touch the adhesive side of the transfer.
- Apply firm, even pressure.
- Work slowly and carefully.
- A heat press is not required.
- Allow decorated drinkware to sit for 24 hours before washing, unless your transfer’s manufacturer specifies otherwise.
🚫 Common Mistakes to Avoid
- Applying to wet or dirty surfaces.
- Repositioning after the adhesive makes contact.
- Pulling the transfer film off too quickly.
- Using insufficient pressure.
- Applying to unsuitable surfaces.
Please Note: C2Z Pressed Inc. is not responsible for transfers damaged due to improper application or installation.
Thank you for choosing C2Z Pressed Inc. — Where Creativity Comes to Life!